OSH Park
Shared projects
PIC 10F SOT-6 adapter
by
CuriousTech.
2
layer board of
0.76x1.12
inches
(19.20x28.32
mm).
Shared on
June 16th, 2015 02:07.
Adapter for PIC10F SOT-23-6 to PICkit using $30 eBay socket.
Use linked one instead. Guide pins were off by 0.25mm
Eagle Files
Sensor Interface Teensy 3.1
by
seanauff.
2
layer board of
2.43x1.75
inches
(61.62x44.48
mm).
Shared on
June 16th, 2015 00:26.
Kinesis 2.5
by
DahDit.
2
layer board of
3.87x1.05
inches
(98.25x26.67
mm).
Shared on
June 15th, 2015 20:18.
https://github.com/chrisandreae/keyboard-firmware
SNES FLASH/ROM
by
gap.
2
layer board of
2.49x1.02
inches
(63.32x25.88
mm).
Shared on
June 15th, 2015 19:29.
copy roms to cartridge
Guide: http://electrifiedfoolingmachine.co/?page_id=743
designed by bryan_kaminski (@datEEsweg)
Raspberry RFM Adapter
by
xpixer.
2
layer board of
1.09x1.10
inches
(27.61x27.94
mm).
Shared on
June 15th, 2015 18:33.
Version 0.2, fixed RFM7x
Direct connect RFM12x/6x/9x/7x Module to all Raspberrys.
Please use the jumper to choose CE0(GPIO08) or CE1(GPIO07) select pin for youre Module.
Here some notes to every Module:
RFM12x: Connect a RFM12 or RFM12b Module direct to RPI. Special Pin: IRQ => GPIO25
RFM6x: Connect a RFM65 or RFM69(W/HW) direct to RPI. Special pin: IRQ => GPIO25
RFM9x: Connect RFM95, RFM96, RFM98 and RFM92 LoRa Modules direct to Raspberry. Special Pin: DIO0 => GPIO25 and DIO5 => GPIO24
RF7x: Connect RFM70, RFM73 RFM75 to Raspberry. IRQ => GPIO25 and CE => GPIO24
This are a Prototype and not testet. Please care!