OSH Park
Shared projects
Light Strip Rev 01
by
oregontrailmike.
2
layer board of
3.30x2.26
inches
(83.72x57.30
mm).
Shared on
June 15th, 2015 17:44.
Light Strip Rev 01
CK's MPU6050 Breakout
by
Cereal_Killer.
2
layer board of
1.01x0.61
inches
(25.65x15.49
mm).
Shared on
June 15th, 2015 16:23.
Use these boards to recycle the MPU6050 gyro off your old / broken flight controllers. I pull them off broken toy grade all-in-one integrated controllers mostly. In the end you only save a few bucks but I hate seeing good parts go in the bin cause I dont have use for the board as a whole.
Note this is a 3v3 board only, DO NOT apply 5V or you WILL kill the gyro, it’s a 3.6v max iC and the common GY-521 breakout has an on board regulator, again this one DOES NOT and only takes 3.3V in! This is prrety much the sparkfun board but with the addition of a indicator LED.
Please see pic’s and description in my RCGroup Blog Post below: http://www.rcgroups.com/forums/showthread.php?t=2438079#post31901300
Base Station Rev. 1.0
by
granth.
2
layer board of
3.38x3.44
inches
(85.83x87.35
mm).
Shared on
June 15th, 2015 16:12.
Wireless Home Control System (WHCS) main board (base station) for the University of Central Florida’s Senior Design. This board acts as the main controller for a home filled with control modules. It displays their status on the mounted LCD and communicates with an Android device over BlueTooth for remote control.
Interfaces with Adafruit’s 2.8" TFT LCD, HC-05 BlueTooth module, and an NRF24L01+.
Full project documentation available here (warning: PDF).
All code available at WHCS' Github.
sensor-hub-pcb v0.1.4 20150224-1013
by
summivox.
4
layer board of
1.00x4.42
inches
(25.27x112.27
mm).
Shared on
June 15th, 2015 16:00.
20 LED-Erduino
by
Viper-Gtr.
2
layer board of
1.64x0.66
inches
(41.61x16.66
mm).
Shared on
June 15th, 2015 09:44.
Arduino kompatible Platine mit 20 LEDs