OSH Park
Shared projects
Stockton Flashlight Bottom Board Rev 3.3
by
chrisluke.
2
layer board of
1.31x0.70
inches
(33.17x17.86
mm).
Shared on
June 14th, 2015 03:03.
The latest version of this documentation and of the Flashlight project is available at https://github.com/stockton-flashlight/flashlight or https://git.flirble.org/flashlight/flashlight.
Flashlight design © 2015 Chris Luke. Flashlight documentation © 2015 Chris Luke.
This project is licensed with the CERN Open Hardware Licence v1.2.
You may redistribute and modify this project under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This project is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable Conditions.
ICS43432DigitalI2SMicrophone.v01y
by
2
layer board of
0.31x0.41
inches
(7.77x10.29
mm).
Shared on
June 13th, 2015 15:01.
Invensense’s latest digital MEMS microphone with 24-bit I2S serial data output in a smaller, higher S/N package. Slightly enlarged sound hole.
HP5328 OCXO Upgrade
by
tomcircuit.
2
layer board of
2.51x2.51
inches
(63.75x63.75
mm).
Shared on
June 13th, 2015 13:56.
Supports the common 8663HS OCXO, and provides precision 10 MHz reference for an HP5328 frequency counter.
https://hackaday.io/project/6278-hp5328-counter-ocxo-replacement
One Key Rev1
by
bklevence.
2
layer board of
1.92x0.48
inches
(48.79x12.22
mm).
Shared on
June 13th, 2015 03:04.
RGB-LED Tape Cross-connect Jumper Matrix
by
Heisenbug.
2
layer board of
2.46x1.45
inches
(62.56x36.83
mm).
Shared on
June 12th, 2015 21:25.
For using differently-wired tapes from different sources together; panel of 4 ports, break-apart (if you want, or you can wire more together to use them as distribution boards).
Use ONLY ONE jumper/wire per 2x4-pin jumper block to avoid short circuits - place jumper or wire vertical in each block when viewing the board oriented like the board thumbnails.