OSH Park
Shared projects
BERG40toDB9x
by
AK6DN.
2
layer board of
1.51x2.31
inches
(38.25x58.57
mm).
Shared on
May 4th, 2015 05:10.
Berg40 to DE9x adapter for DEC boards
This is an adapter board for DEC serial boards (DL11 series, KL8 series) that use the 40pin BERG (IDE) 2x20p cable connector for the serial port. It routes the serial signals from the flat cable connector to various pins on the DB9 (M or F) connector thru a set of 100mil jumper header blocks. Flexibility for using either a male or female DB9 connector is provided by using different jumper block positions.
J2 is a standard shrouded 40p male connector.
J1 is either a DB9 female or male connector, as desired.
P1-P4 are a set of header pins for jumpers.
Design files are accessible at this link
These are DipTrace schematic and layout data files; acrobat PDF of schematic and board are provided, as well as full layout gerber and drill files.
BlackBelt
by
AFJay.
2
layer board of
3.27x3.16
inches
(83.16x80.16
mm).
Shared on
May 4th, 2015 03:10.
I2C Keyboard Lipoly Charger
Sensor 1.1
by
shafqat.
2
layer board of
0.56x0.69
inches
(14.30x17.63
mm).
Shared on
May 3rd, 2015 21:47.
Accelerometer with Temp Sensor
TinyWise v3
by
zasf.
2
layer board of
1.88x1.47
inches
(47.70x37.21
mm).
Shared on
May 3rd, 2015 15:46.
Filament width sensor based on TSL1401CL linear sensor array and ATtiny85, see http://www.thingiverse.com/thing:699308
Brushed Adapter v0.1
by
peabody124.
2
layer board of
1.43x1.43
inches
(36.27x36.27
mm).
Shared on
May 3rd, 2015 15:39.
A brushed adapter for Sparky or Sparky2 with an integrated 5V adapter and 200mW 5G8 VTX. Unfortunately it uses the TX5200M module which is hard to come by.