OSH Park
Shared projects
Kelduino 1.1
by
W5KPM.
2
layer board of
1.55x1.93
inches
(39.27x49.07
mm).
Shared on
May 3rd, 2015 05:22.
reset switch moved to facilitate bringing out RESET TX and RX lines. Provided space for JST connector at the top right (add 2 pin JST) to serve as 3 volt input for 3v projects. Any questions or comments to kelly@diyelectrogadgets.com
Cup detector
by
Nocduro.
2
layer board of
0.49x0.40
inches
(12.40x10.16
mm).
Shared on
May 3rd, 2015 04:20.
GP2S60B reflective ir sensor
BattPack v1.0
by
BrentBlueAllen.
2
layer board of
0.50x0.75
inches
(12.70x19.05
mm).
Shared on
May 3rd, 2015 04:02.
TI BQ24075 Single-Cell Lithium-Chemistry Charger
4x BTN7960/BTN8962 v1b dual H-bridge
by
Heisenbug.
2
layer board of
4.61x2.20
inches
(117.14x55.88
mm).
Shared on
May 2nd, 2015 22:16.
Untested/Revised; caps moved closer to ICs. Same size, same schematic.
Bill of Materials
| Qty | Value | Name (if not generic) |
-----------------------------------------
| 4 | 2K4ohm | (1/4W 5% ok) |
| 8 | 1Kohm | (1/4W 5% ok) |
| 4 | 10Kohm | (1/4W 5% ok) |
| 4 | 10uF | (35V Electrolytic ok) |
| 4 | 220+uF | (50V Electrolytic ok) |
| 1 | Header | 20/26pin shrouded Square
| 4 | 1N5408 | (3+Amp Rectifier 40+V ok)
| 4 | BTN7960| (Obsolete, BTN8962 ok) |
| 4 | Header | (5-pin/shrouded, keyed good)
| 1 | Solderable Terminal Strip 6pos/0.3" Rated 10+Amp
Simulator Interface Board - Rev B
by
AndrewIC.
2
layer board of
2.23x1.88
inches
(56.54x47.65
mm).
Shared on
May 2nd, 2015 20:52.