OSH Park
Shared projects
BLF 10cc v2.03
by
Cereal_Killer.
2
layer board of
0.40x0.40
inches
(10.11x10.11
mm).
Shared on
February 15th, 2015 19:43.
single side 10mm CC driver, for PIC or AVR!
Heatermeter 4.2.4 Cat5 Connections
by
JohnB.
2
layer board of
4.72x1.80
inches
(120.02x45.72
mm).
Shared on
February 15th, 2015 17:55.
[outdated][untested][super-difficult] 10mm DD + single 7135 w/ LFPAK33 v008
by
Red.
2
layer board of
0.40x0.40
inches
(10.03x10.03
mm).
Shared on
February 15th, 2015 15:25.
https://oshpark.com/shared_projects/WxbH4cRs
Don’t try this at home. Order one to cry over if you want.
Forum Thread: http://budgetlightforum.com/node/37726
Model 100 EXTRAM
by
twospruces.
2
layer board of
0.91x1.62
inches
(23.14x41.17
mm).
Shared on
February 15th, 2015 12:25.
internal EXTRAM module, replacing the Main ROM with an EEPROM + SRAM combo.
Slip Ring Interface - High Current
by
flthymcnsty.
2
layer board of
2.72x1.27
inches
(69.09x32.28
mm).
Shared on
February 15th, 2015 11:39.
The Slip Ring Interface boards utilize 4 slip ring wires on each of the two power rails to allow for higher currents. Board also has I2C (4 pins, D, C, 5V, G) and Serial (4 Pins, Tx, Rx, 5V, G) pins broken out. These 8 pins utilize one slip ring wire apiece and can also be used as one wishes.
LEDs can also be installed to provide visual feedback that power is indeed being passed correctly through the slip ring. Their installation is optional.