OSH Park
Shared projects
- You need to sign in or sign up before continuing.
Linear BEC 2.0 5V 0,8A
by
hofftari.
2
layer board of
0.40x0.97
inches
(10.26x24.74
mm).
Shared on
February 4th, 2015 16:21.
Simple voltage regulator circuit to be used with a 1117 device and act as a linear BEC for an RC system.
BOM:
One 1117 model surface mounted low drop voltage regulator (I.e TLV1117 with a 5V output voltage), SOT-223
Two 10uF Tantalum 6032 size surface mount capacitors, ~25V max voltage
The backside has an area without solder mask if you wish to attach a small heatsink. The drill holes help transfer the heat.
Linear BEC
by
hofftari.
2
layer board of
0.62x1.67
inches
(15.85x42.52
mm).
Shared on
February 4th, 2015 16:19.
Simple voltage regulator circuit to be used with a 1085 device and act as a linear BEC for an RC system.
BOM:
One 1085 model low drop voltage regulator (I.e LD1085 with a 5V output voltage), TO-220
Two 10uF Tantalum surface mount capacitors, ~25V max voltage
The backside has no solder mask so you can attach a heat sink as this device will get pretty warm on higher amperages. There are some decent 16x16mm heat sinks that can be bought through Ebay if one wishes.
HDС1000 Breakout
by
Cthulhu.
2
layer board of
0.60x0.60
inches
(15.16x15.16
mm).
Shared on
February 4th, 2015 14:56.
HDC1000 Breakout Board.
RN4020 Breakout
by
hackjob.
2
layer board of
0.96x1.05
inches
(24.28x26.57
mm).
Shared on
February 4th, 2015 01:50.
Breakout board for RN4020 Bluetooth Low Energy module. Also room for a Skyworks 5V charge pump regulator (which went obsolete a week after I made this board).
Pi Board LP
by
Crashfrog.
2
layer board of
3.34x2.31
inches
(84.86x58.55
mm).
Shared on
February 3rd, 2015 21:36.
Low-ProfileDoubleBoard