OSH Park
Shared projects
[OUTDATED] Untested - 17mm A17DD-SO8 v002
by
Red.
2
layer board of
0.67x0.67
inches
(17.02x17.02
mm).
Shared on
October 13th, 2014 03:02.
http://budgetlightforum.com/node/35507
[OUTDATED] Firmware Developers Only - 17mm DD+7135 v012
by
Red.
2
layer board of
0.67x0.67
inches
(17.02x17.02
mm).
Shared on
October 13th, 2014 02:14.
If you can’t figure out the component placements on a completely unlabeled board, this is not for you. This board does not have a firmware available. This board is untested. Any silkscreen markings are arbitrary and have no meaning.
This board requires a Power-SO8 footprint N-Channel FET such as PSMN3R0-30YLDX. Something like AO4468 should also work if you have that laying around.
This board DOES have the [June/July 2014] anti-boost fix incorporated which should allow us to run the FET without any resistors.
17dd_PIC_322 v1.0
by
Cereal_Killer.
2
layer board of
0.67x0.67
inches
(17.02x17.02
mm).
Shared on
October 13th, 2014 00:08.
17mm Direct Drive driver for the PIC 10F322 *see thread http://budgetlightforum.com/node/33927
- U1 is PIC 10F322
- D1 is SOT-323
- Z1 is SOT-123 (only populate if needed)
- C1 is 10uf 0805 X7R (for clicky builds using tterev3’s FW a resistor is stacked over the cap)
- FET is D2PAK such as AOD510 or (the no longer available Vishay 70N02)
MPU9250
by
Swetko.
2
layer board of
0.48x0.32
inches
(12.12x8.10
mm).
Shared on
October 12th, 2014 21:39.
MPU 9250 mini SPI board
power supply v0.1
by
rusefi.
2
layer board of
1.51x1.54
inches
(38.38x39.01
mm).
Shared on
October 12th, 2014 20:50.