OSH Park
Shared projects
- You need to sign in or sign up before continuing.
FPV Buzz FLy Electronics
by
Buzzfpv.
2
layer board of
2.08x2.08
inches
(52.73x52.73
mm).
Shared on
October 25th, 2016 13:47.
patch 5.8
5V_0.95inch_SPI_Oled_Rev2.1
by
miker.
2
layer board of
1.01x1.05
inches
(25.68x26.72
mm).
Shared on
October 25th, 2016 11:43.
Schematic and Bill of materials at: https://github.com/mike-rankin/3.3v-5v_0.95inch_SPI_Color_Oled
Grab the shared PCB from OSHPark at https://www.oshpark.com/shared_projects/Vlc5MLaO
Reach me at @mikerankin for any questions or comments
Mantis_v1a.brd
by
falkenad.
2
layer board of
0.71x1.41
inches
(17.91x35.71
mm).
Shared on
October 24th, 2016 23:11.
V1a breaks out PA15 and changes the 32kHz crystal to a larger and cheaper ABS6.
An STM32L4 microcontroller in a Teensy form factor. This board was designed as a 2-layer PCB with all components on the top side as a more cost-effective, very low power Cortex M4 alternative. Design inspired by Kris Winer’s Dragonfly and Paul Stoffregen’s Teensy.
Includes both low-speed and high-speed oscillators, a supercapacitor RTC backup, an extremely low Iq LDO regulator, and flash memory. The supercapacitor’s VBAT pin is broken out such that an external coin cell or supercapacitor may be used.
phasor BREAKOFf v1.1
by
robotgraves.
2
layer board of
1.25x2.10
inches
(31.78x53.37
mm).
Shared on
October 24th, 2016 19:35.
phasor master v1.1
by
robotgraves.
2
layer board of
2.55x2.10
inches
(64.80x53.37
mm).
Shared on
October 24th, 2016 19:35.