OSH Park
Shared projects
MAX6126 Breakout Board
by
rlramirez77.
2
layer board of
1.89x1.01
inches
(47.96x25.63
mm).
Shared on
July 5th, 2016 18:42.
MAX6126 Breakout Board
RFM69 breakout
by
rlramirez77.
2
layer board of
1.19x1.19
inches
(30.28x30.28
mm).
Shared on
July 5th, 2016 18:41.
Breakout board for RFM69HCW module
ATX Breakout
by
tmdrake.
2
layer board of
2.60x1.19
inches
(66.04x30.15
mm).
Shared on
July 5th, 2016 12:16.
ESP8266-01 RemoteButton
by
RogerParkinson.
2
layer board of
0.47x1.23
inches
(11.99x31.24
mm).
Shared on
July 5th, 2016 02:34.
The board holds through hole connections for an ESP8266-01 and breakouts for an FDTI, VCC and GND. It is small enough to solder the ESP to and still leaves the ability to plug in an FDTI to reflash. There’s a jumper for GPIO0 and it uses the DTR from the FDTI to pull RST low. You can power the ESP from the FDTI by putting a jumper on JPVCC but the FDTI won’t provide enough power to actually run the ESP after flashing. The ‘Switch’ breakout uses CH_PD. Connect an n/o switch to this and the ESP can detect it. More detail at https://github.com/RogerParkinson/ESP8266-automation
needler audio
by
VolpinProps.
2
layer board of
2.51x1.27
inches
(63.83x32.39
mm).
Shared on
July 5th, 2016 02:33.