OSH Park
Shared projects
Warp Core Lamp Controller - Nano Rev B
by
Elmoc.
2
layer board of
2.09x1.10
inches
(53.04x27.94
mm).
Shared on
July 3rd, 2016 16:06.
For more detail, see http://www.thingiverse.com/thing:1656741
rgb constant current driver
by
yuval.
2
layer board of
1.61x3.91
inches
(40.79x99.21
mm).
Shared on
July 3rd, 2016 10:15.
350ma constant current rgb driver for 10w-20w leds
Atari Pause Mod V2.0A
by
SwampFox56.
2
layer board of
0.88x1.08
inches
(22.23x27.31
mm).
Shared on
July 3rd, 2016 08:16.
For the Atari 2600. Based on Victor Trucco’s schematic; this board intercepts the read, write signals from the TIA and 6507. Shorts them to ground which puts the processor in a “HALT"ed state.
TIA Pin 3 (RDY) has to be lifted, but Pin 3 (RDY) of the 6507 stays connected to the board. You can lift TIA Pin 3, but removing resistor R207 is exactly the same as lifting the pin. More advanced install instructions here.
http://www.coolretroprojects.com/Atari_2600_Pause_Mod_Installation_Guide.pdf
SID Shield
by
PolitisktInkorrektPappa.
2
layer board of
1.96x2.01
inches
(49.78x51.05
mm).
Shared on
July 3rd, 2016 01:30.
sidaster custom shield
WS2812B Breakout Board
by
PolitisktInkorrektPappa.
2
layer board of
0.65x0.38
inches
(16.59x9.53
mm).
Shared on
July 3rd, 2016 01:28.
A single sided breakout board for WS2812B - free to use!