Implant 4.4

2 layer board of 1.05x0.40 inches (26.67x10.16 mm).
Shared on June 16th, 2016 15:05.

Head implant consisting of two laser diodes. Click here for documentation

Order board. Download. Permalink. Embed order link.

EscornaBot cpu 2.10

2 layer board of 1.97x3.53 inches (49.91x89.59 mm).
Shared on June 16th, 2016 09:41.

Escornabot is an open source/hardware project that aims to bring robotics and programming to children. http://escornabot.com/web/

Order board. Download. Permalink. Embed order link.

Gen7 Board-ARM v2.0 reprap

2 layer board of 4.35x3.56 inches (110.52x90.53 mm).
Shared on June 16th, 2016 05:58.

Gen7 Board-ARM v2.0

A well documented DIY ARM based reprap 3D printer controller board

• LPC1114FN28 MCU, a 32-bit ARM CortexM0+.
• Onboard USB-serial adapter, implemented with an MCP2200.
• Support for up to 4 stepper drivers in the “Pololu format”.
• Support for extruder and heated bed.
• Support for two SPI devices (e.g. SD card and display).
• Support for always-on fans (5, 7 or 12 volts).
• No power supply wiring neccessary, just plug an unmodified ATX supply in and be ready.
• Software power on/off.
• Oversized high current tracks and MOSFETs for reliable, cool operations.
• Board size 110 x 90 mm.

2 layer board of 4.35x3.56 inches (111x91mm). $77.50 for three.

Order board. Download. Permalink. Embed order link.

chip_sim808_fiducial.zip

2 layer board of 1.61x2.64 inches (40.84x67.06 mm).
Shared on June 16th, 2016 03:56.

Order board. Download. Permalink. Embed order link.

IR Remote 2.1

2 layer board of 2.45x1.62 inches (62.23x41.02 mm).
Shared on June 15th, 2016 21:37.

Remote control for Cerebro receiver. Click here for documentation

Order board. Download. Permalink. Embed order link.