OSH Park
Shared projects
trinket linker 1
by
dunk8888.
2
layer board of
1.52x0.62
inches
(38.61x15.70
mm).
Shared on
May 4th, 2016 03:50.
Copy Cat
by
dunk8888.
2
layer board of
1.69x0.90
inches
(43.03x22.86
mm).
Shared on
May 4th, 2016 03:49.
AcroIQ Basic4 LED Driver
by
theatrus.
2
layer board of
1.60x2.25
inches
(40.67x57.18
mm).
Shared on
May 4th, 2016 02:41.
CPLD
by
mrengstad.
2
layer board of
0.70x2.00
inches
(17.88x50.90
mm).
Shared on
May 3rd, 2016 21:31.
A simple breakout for the Xilinx XC9572 CPLD
The only additional component is the 3.3V LDO regulator. If you already have 3.3V available, a pin is available to bypass it. Inputs and outputs are 3.3V if you insert a jumper; otherwise, the outputs are powered from the VCCIO pin. While the IO is 5V tolerant, the VCCIO must be less than 3.3V, for instance, 2.5V or 1.8V.
The breakout tested fine, and it works like a charm.
OMSI - DOW - Wave Table Uno Shield
by
hydronics.
2
layer board of
2.72x2.49
inches
(69.01x63.25
mm).
Shared on
May 3rd, 2016 21:11.
Arduino Uno Shield, Power Transistors, 2 n-channel, 2 p-channel