OSH Park
Shared projects
2s_usb_boost_lipo
by
snowluck2345.
2
layer board of
2.77x1.56
inches
(70.36x39.50
mm).
Shared on
April 18th, 2016 20:09.
ChibiTerm v2 - Low Cost Terminal Module
by
FPGA-Computer.
2
layer board of
1.00x0.70
inches
(25.43x17.78
mm).
Shared on
April 18th, 2016 19:53.
https://hackaday.io/project/9992-low-cost-vga-terminal-module
3-Way RJ12 Splitter
by
carlmarxman.
2
layer board of
2.19x0.77
inches
(55.70x19.51
mm).
Shared on
April 18th, 2016 18:26.
A splitter for RJ12
Pinduino - Input Board
by
eaconner.
2
layer board of
3.95x2.00
inches
(100.33x50.80
mm).
Shared on
April 18th, 2016 11:19.
v1.0.3
Arduino based pinball control system library and hardware.
ATtiny45 motion sensing night light V1.2 c
by
DanR.
2
layer board of
2.69x2.28
inches
(68.40x57.89
mm).
Shared on
April 18th, 2016 09:31.
VERIFIED WORKING
This light is powered by an ATtiny45/85 which powers on the 14 LED lights when motion is sensed and it is in a dark room. The light sensor on the board will not allow the lights to come on if it is in a reasonably lit room.
It is fitted with a barrel plug for power, this model specifically with an L7805CV power regulator.
NOTE - I use a 3 pin female header to plug the PIR sensor into to the PCB.
Designed using Fritzing
My Fritzing file
If you have any questions, you can email me HERE