OSH Park
Shared projects
- You need to sign in or sign up before continuing.
Standarduino Rev1
by
oregontrailmike.
2
layer board of
3.51x1.43
inches
(89.05x36.20
mm).
Shared on
March 8th, 2016 02:04.
Standarduino Rev1
MIB
by
Microsat.
2
layer board of
1.70x1.20
inches
(43.28x30.58
mm).
Shared on
March 7th, 2016 22:04.
3R2 Motor Interface board
RPI2B-OPC32-PM-2
by
Altronic-Research-Inc.
2
layer board of
3.66x3.47
inches
(92.96x88.11
mm).
Shared on
March 7th, 2016 20:08.
ARI Panel Mount OPC3-RPI2B Mating Board rev.2. Couples Rasperry PI 2B to 4D Systems uLCD32-PTU with breakouts for I2C(uLCD32-PTU) includes 4.7k pullup footprints, LiPo/charging circuit(uLCD32-PTU), uLCD32-PTU programming header,+3.3V out, +5V out, GND, and linking UARTs between the two as well as a few digital signal pins.
NEDONAND-3
by
Shaos.
2
layer board of
3.29x3.15
inches
(83.52x80.01
mm).
Shared on
March 7th, 2016 14:29.
3rd board for NEDONAND project
It’s stackable 4-bit part of NEDONAND program counter with parallel load that uses 2 board NEDONAND-2 to count from 0000 to 1111 binary. Pins description (2 rows - male for inputs and female for outputs):
1.1) IN (OUT) - count enable
1.2) ACT0 - external writing signal "0"
1.3) ACT1 - external writing signal "1"
1.4) /RESET - master reset
1.5) CLK - clock signal
1.6) NC - not connected
1.7) VCC - power +5V
1.8) GND - ground
2.1) D0 - bit 0 for writing
2.2) D1 - bit 1 for writing
2.3) D2 - bit 2 for writing
2.4) D3 - bit 3 for writing
2.5) D4 - used in next stacked boards
2.6) D5 - used in next stacked boards
2.7) D6 - used in next stacked boards
2.8) D7 - used in next stacked boards
2.9) D8 - used in next stacked boards
2.10) D9 - used in next stacked boards
2.11) D10 - used in next stacked boards
2.12) D11 - used in next stacked boards (in case of 2K memory it's "0")
4-bit address output header on the right:
3.1) A0
3.2) A1
3.3) A2
3.4) A3
RS16 Motherboard
by
Ryan-Summers.
2
layer board of
3.35x4.27
inches
(85.19x108.43
mm).
Shared on
March 7th, 2016 08:54.
This is the RS16 motherboard that has edge card connections for all external boards.