User Tools

Site Tools


Tuning Up Home Positions

Table of Contents

Preliminary Arrangements

To configure PLEN2's home positions requires the robot's firmware ver.1.1.0 or later. Please download and install it before to do continued steps.

Tuning Up Process

Download latest version "ControlServer".

Connect your PLEN with USB (type micro B) cable.

Run server.exe (for Win) or (for Mac).

Open PLENUtilities.url (for Win) or PLENUtilities.webloc (for Mac).

  • Please move each servo's sliders until PLEN will be standing straightly.
  • If you click “HOME” button, a home position is saved. (You may not configure min and max position basically.)

Tuning Up in More Details

Please consider following conditions.

  • Even if play “walking” motion, PLEN does not fall to the ground.
  • Even if play “walking” motion, PLEN's hands does not rub on her waist.
  • Playing “clap” motion, PLEN's hands touch each other, and it sounds “Clap! Clap!”.

We have released “PLENConnect” as a simple controller for PLEN series robot.

Please download the application, and you can check “walking” movement to drag the circle at the left pane, and “clap” movement to click the icon in the middle, the third stage, the right pane.

Prev < Attach Covers

tutorials/plen2/tune.txt · Last modified: 2017/05/08 05:24 by Guvalif