Translations of this page:
User Tools
Sidebar
specifications:print_detail:head
Table of Contents
Head
Overview
| 3D Printer Used | Print Region |
|---|---|
| Afinia H480 | Head |
| | |
Files that Need to Print
| HEAD_A.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 | | 0.15 [mm] | Loose | Normal | 116[min.] | |
| BARB_A.stl | ||||||
|---|---|---|---|---|---|---|
| Q'ty | Placement | Z Resolution | Fill | Quality | Output Time | Print Result |
| 1 | | 0.15 [mm] | Loose | Normal | 65[min.] | |
specifications/print_detail/head.txt · Last modified: 2016/01/12 05:41 by PLEN Project Committee
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 3.0 Unported
