Missing layer - NanoDLP Slicer

jb · 2018-11-11 21:53:15

Hi everybody,

After my update on my last version of the NanoDLP Slicer, I got now some missing layer randomly...
I never change my machine setting or resin profile for 2 years and STL files stay the same.

Here some example :

Does anyone have the same problem? An idea of a solution?

Thanks all for your help & reply!

Jean-Baptiste

Shahin · 2018-11-13 04:49:33

Please, share the STL file. It the most probably faulty triangle which affect slicer in special conditions. You can checkout the issue using netfab.

elshad66 · 2018-11-13 11:54:56

Hello Shahin
I had cases when (1956 build)
I put one element and copied to nanodlp pressing C
creating multiple pieces(chains)
and came out the same problem as described above
item has been checked through magics 20
then I just changed the position of the elements and everything was fine

but I had another problem
after upgrading to 1919, pi does not load the first time
the projector shows a red yellow green square
you need to restart 3-4 times, sometimes it does not help
sd card extract and insert helps sometimes
each time differently
DC is stable, not lower than 5.1-5.2 volts

Last edited by elshad66 (2018-11-13 12:25:10)

jb · 2018-11-13 12:09:26

Thanks for your rapid answer @Shanin.

I just send you an MP with a link of one STL. It's always repaired with netfabb...

Thanks again for your help!

uups · 2018-11-14 09:33:32

Shahin wrote:

Please, share the STL file. It the most probably faulty triangle which affect slicer in special conditions. You can checkout the issue using netfab.

Hi. Shanin. Thank you for always.
I had a similar problem. So I would like to suggest one thing. Like creation workshop
Can I give options to slicers?
compound path

Shahin · 2018-11-15 21:53:28

I do not know which option you are talking about.

nanoDLP

#1 2018-11-11 21:53:15

Missing layer - NanoDLP Slicer

#2 2018-11-13 04:49:33

Re: Missing layer - NanoDLP Slicer

#3 2018-11-13 11:54:56

Re: Missing layer - NanoDLP Slicer

#4 2018-11-13 12:09:26

Re: Missing layer - NanoDLP Slicer

#5 2018-11-14 09:33:32

Re: Missing layer - NanoDLP Slicer

#6 2018-11-15 21:53:28

Re: Missing layer - NanoDLP Slicer

Board footer