You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2018-01-06 15:36:49
- MonkeyTurnip
- Member
- Registered: 2018-01-06
- Posts: 1
Latest Build as an image file
Hi is there a newer version of the image file that 1380?
on this https://www.nanodlp.com/download/ the image file is 1380. i see in the build log thread it goes upto 1700, i would just like to use the latest version, but i seem to not be able to find a .img.
using a Wanhao D7 if that makes a difference.
TIA
MonkeyTurnip
Offline
#2 2018-02-21 14:37:13
- miserovitch
- Member
- Registered: 2018-02-21
- Posts: 15
Re: Latest Build as an image file
Hi,
Same question for the same machine.
Hope we'll have some answer.
BR
Offline
#3 2018-02-22 01:47:53
- elshad66
- Member
- Registered: 2017-03-31
- Posts: 114
Re: Latest Build as an image file
setup>> tools>>upgrade nanodlp --choose beta or stabile version
wait 2-3 minutes PI update and automatically reboot
latest beta 1787
Last edited by elshad66 (2018-02-22 01:56:37)
Offline
#4 2018-02-23 08:05:28
- miserovitch
- Member
- Registered: 2018-02-21
- Posts: 15
Re: Latest Build as an image file
Hi,
Thanks for the help.
I had issue with update. I solved it by accessing RPI through SSH and updating the hour (auto time adjust is not working...).
So now I have the last build...and another problem :-)
I will look in the forum, if I don't find I'l open a new topic.
LC
Offline
#5 2018-02-23 16:32:26
- elshad66
- Member
- Registered: 2017-03-31
- Posts: 114
Re: Latest Build as an image file
1. enter the router or modem and make the address pi static
2. make the address PC static
3. Set your settings and options in the pi
4 .Download Windows 32bit version or Windows 64bit version. and run only nanodlp.exe (not necessary settings and options)
5. in PI -- setup >>Remote Slicer write IP static address PC 192.168.xxx.xxx:8080
6. Load STL model in PI
7 .if you want to update, do as you wrote above
Last edited by elshad66 (2018-02-23 17:29:58)
Offline
Pages: 1