nanoDLP

https://cl.ly/1Z1R2X3m1d47

https://www.dropbox.com/s/8au5k4edil2ev … 0.zip?dl=0
Debug file

Could you check these settings? https://cl.ly/151E0o0p2m2a
I failed my last print with them. I changed "Wait Before Print" from 2 sec to 0.3. It solved an issue with 2 sec blank projection image. But I need 2 sec pause after lift to let polimer surface distribute. What is correct place in nanoDLP Profile page to put this 2 sec delay?

I have set  Wait After Lift  1 sec but actually there were  no any delay. Movement down, shutter opens, 0.3 sec delay, projection the slice image, shutter close, lift up.
I`d like to get

Movement down, 2 sec delay,  shutter opens, 0.3 sec delay, projection the slice image, shutter close, lift up.

2 second delay still remains

https://goo.gl/photos/3KcR2HG5DGd234kt7
https://goo.gl/photos/4KTkdsE4zB4HyWvx6

I understand that in the current resin profile there is 2 sec delay for resin releveling/bubbles out. Is it possible to make shutter opening 0.5 seconds before real slice projecting?

Could Pixel dimming also decrease parasite effect?

"Unknown" it was command switching projector menu to English language.

These command from manual:
Lamp Time
Write Reset Lamp
usuage hour 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x01 0x00 0x62
Read Lamp usuage
hour 0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x15 0x01 0x63

This command \x07\x14\x00\x05\x00\x34\x00\x00\x15\x01\x63  already in place more than 2 weeks but does not work

UNKNOWN    2017-01-13 20:52:28.594294 {"Layer":"50","module":"Projector","level":"Notice","msg":"Following string from the projector received "}
Notice    50    2017-01-13 20:52:27.593451    Projector    Start reading lamp hours

Unfortunatelly Terminal window clear any information when input these projector Gcode commands.

[[Projector  \x07\x14\x00\x05\x00\x34\x00\x00\x15\x01\x63]]

Do I need after upgrading to the beta make factory reset settings?

[[Projector  \x06\x14\x00\x04\x00\x34\x12\x0F\x01\x6E]]

Now it works

Error was with 2 spaces instead 1

How could I change command "update lamp time"?

Unfortunately it doesn`t work. Could you suggest the right field for that command?
Update Lamp Hours button in the Projector Calibration menu page doesn`t work also.
\x06\x14\x00\x04\x00\x34\x12\x0F\x01\x6E    Brilliantcolor on command

\x07\x14\x00\x05\x00\x34\x00\x00\x15\x01\x63      read lamp usage

Yes, I know that it should be \x06\x14\x00\x04\x00\x34\x12\x0F\x01\x6E
but which field should I add this command?