nanoDLP

i have tried(stl binary,slc) upload again, with no success.

it seems that formula is being calculated, but theres no info from layers section

yes

Last edited by 1125lbs (2017-06-29 21:34:57)

yes

all parts ( even with AA turned off) (bright-255) are reurning in half shade slices... its being an issue for me, and sensitive enough to 25µ pixel size, making dynamic cure not that eficiently

Last edited by 1125lbs (2017-06-30 05:58:02)

mask is turned-off

Last edited by 1125lbs (2017-06-30 06:16:51)

The "halfshade" was mask issue, strange why its was activated, maybe accidently...i solved spherical distortions physically lens set, it was not required feature before, but some way i resolve to check anyway... thankyou

But the main issue still happening,  the missing layering information inisde (Toggle Details) which we use to plan the strategy on formula box.
I export tha same stl both in ascii and bin versions, the same result.other files was test with slc too same results....

the layer half shade was a mask issue as you mentioned, i tested the ascii & bin, but still lacking the mesh area information

thank you!