PopPet has a two page spread in the September issue of the SERVO magazine. Starting on page 62. Check it out!

Now that the campaign is over, the fun begins! 
Make sure to head on over and join the forums!
For all you backers out there, the forums are going to be the place to get access to your exclusive goodies. Make sure to join as soon as possible so I can begin adding you to the backer only group where I will post code, 3D printable parts and graphics that only you will get access to!
There is still a lot being added to the site so make sure to keep checking it as much as possible so you don't miss out on anything.

During the last week of the campaign I announced that I would give away a Standard PopPet kit to one lucky person who shared a status that included PopPet's campaign link and the hashtag #PopPetTheRobot. Well, that time has come.

I scoured social media and compiled a list of all the people who met the requirements and ran that through a random selection process that returned the name of the winner of a Standard PopPet kit... and that person is... *drum roll*.

Chris Dillon! Congratulations Chris! I'll be getting in contact with you shortly.

Thank you to everyone who shared PopPet's campaign on social media, it certainly did help! 

That's all for now. Regards,
Jaidyn.

It's done! All over! We even reached our first stretch goal! What an experience. Expect a video update soon.
https://www.kickstarter.com/projects/jaidynedwards/poppet-diy-arduino-compatible-open-hardware-robot

With 33 hours to go we have just passed our goal of $8000!
Thank you everyone for your continued support, whether that be backing our project or just sharing our campaign on social media.

If you want a PopPet be sure to head on over to the campaign page as soon as possible!