Forum

Welcome Guest 

Show/Hide Header

Welcome Guest, posting in this forum requires registration.
Pages: [1]
Author Topic: 433 Mhz for the Gondola
EATYone
Advanced
Posts: 67
Permalink
Post 433 Mhz for the Gondola
on: June 28, 2016, 21:47
Quote

Hi everyone,

After some coding/arduino works today, i can drive my servo on my gondola without wire... Some coding have to be down before say houuuurrrra, because of some pen lift pen down not detected, but i'm really happy... Is someone here have down this job before and can give some advice?

Using virtualwire Library and a chip 433Mhz module ...

PS : sorry for my poor English ...
Image
kongorilla
Pro
Posts: 362
Permalink
kongorilla
Post Re: 433 Mhz for the Gondola
on: June 29, 2016, 00:16
Quote

I can't help with the technical part, but I want to say that's really cool. You need to have some batteries on the gondola, then?
EATYone
Advanced
Posts: 67
Permalink
Post Re: 433 Mhz for the Gondola
on: June 29, 2016, 08:58
Quote

yeah i'll need batteries, in place of counterweight 🙂

EATYone
Advanced
Posts: 67
Permalink
Post Re: 433 Mhz for the Gondola
on: June 29, 2016, 13:20
Quote

But anyway, my coding skillz is really Low level ...
EATYone
Advanced
Posts: 67
Permalink
Post Re: 433 Mhz for the Gondola
on: June 30, 2016, 14:49
Quote

EATYone
Advanced
Posts: 67
Permalink
Post Re: 433 Mhz for the Gondola
on: July 1, 2016, 11:23
Quote

Too much error in transmission, time to test another wireless tech...
EATYone
Advanced
Posts: 67
Permalink
Post Re: 433 Mhz for the Gondola
on: July 5, 2016, 10:37
Quote

Waiting for Bluetooth modules

EATYone
Advanced
Posts: 67
Permalink
Post Re: 433 Mhz for the Gondola
on: July 25, 2016, 13:36
Quote

Bluetooth HC05 modules are here. Will test them
Pages: [1]
Mingle Forum by cartpauj
Version: 1.0.34 ; Page loaded in: 0.037 seconds.