This is how it all gets used.
And this is how to get it to do it!
- First dig around In the box
- Then Build the machine
- Make some Connections
- Set up the gondola
- Play on the Touchscreen controls
- Then load up the Controller application
- Troubleshooting!
2 thoughts on “Setting up your PolargraphSD”
Leave a Reply
You must be logged in to post a comment.
My working area is 1150mm wide, you say to drop home position down from 120mm proportionately. How do I do that since I don’t know what the work area width was to determine 120mm. I looked to see if I could find your work area width but couldn’t find it.
TIA!
Ha ha! Excellent point! Default machine size is about 800mm, but it honestly doesn’t make a massive amount of difference. Not a hard and fast rule. What I tend to do is pick a distance, try it out, and if I can drive the gondola away from the point, and then easily get back to it, then it’s ok. But try 150 or 200mm if you have problems with 120mm.