Forum

Welcome Guest 

Show/Hide Header

Welcome Guest, posting in this forum requires registration.
Pages: [1]
Author Topic: Controller Occasionally Becomes Unresponsive
kongorilla
Pro
Posts: 362
Permalink
kongorilla
Post Controller Occasionally Becomes Unresponsive
on: April 3, 2012, 18:03
Quote

While working on a multi-pass polargraph drawing over the weekend, I ran into an issue that has popped up occasionally in the past. After a drawing is finished I clear the image, load a new one, hit "render pixels", the pop-up dialog appears, hit the button that generates commands, and.....nothing. No commands are sent to the queue, and seemingly no button does anything (except mouseovers do display, if I remember correctly).

Since I'm doing multiple passes, I really want the registration of passes to be spot on, and that's easiest to achieve if all the passes are done during the same controller session. So, is it known what causes this to occasionally happen, and is there a way to avoid it?

Here's the pic, BTW:
Doggy Diner - 4 Color Printing 1st Attempt
sandy
Administrator
Posts: 1317
Permalink
sandy
Post Re: Controller Occasionally Becomes Unresponsive
on: April 3, 2012, 19:19
Quote

Kong, I've run into the same issue a few times too. I usually run the app through Processing rather than standalone, so I can see when it crashes more clearly (lots of red angry writing in the console) but am not really clear as to the root cause of it. I wondered if it was only happening when running through the processing, so I just sucked it up, but if you're having it too then I'll have a closer look.

Ace pic btw.

sn
sandy
Administrator
Posts: 1317
Permalink
sandy
Post Re: Controller Occasionally Becomes Unresponsive
on: June 10, 2012, 22:13
Quote

I think this issue is fixed in controller 1.1.7. If it's the same one I get anyway.

sn
Pages: [1]
Mingle Forum by cartpauj
Version: 1.0.34 ; Page loaded in: 0.027 seconds.