Forum

Welcome Guest 

Show/Hide Header

Welcome Guest, posting in this forum requires registration.
Pages: [1]
Author Topic: line is not on the page?
imagecar
Newbie
Posts: 2
Permalink
imagecar
Post line is not on the page?
on: February 29, 2016, 08:24
Quote

Hello guys, 🙂
I am an Italian maker, excuse my English 🙂
I have a homebuilt polarshield
Arduino one and motorshield v1
turns with win7-64
I have a problem with vector, when I try to draw he says:
line is not on the page
I no longer go on !!!!!!
I attach picture and 2 configuration file.
Thank you and good leap day
https://drive.google.com/folderview?id=0B-DV_Ulvqz26VE9kVGFDb2tPZTQ&usp=sharing
Image
sandy
Administrator
Posts: 1317
Permalink
sandy
Post Re: line is not on the page?
on: February 29, 2016, 15:31
Quote

Hello 🙂

https://github.com/euphy/polargraph/wiki/Gondola-isn't-moving

It looks like you have done "set home", so that's good.
Make sure you have uploaded your machine spec.

https://github.com/euphy/polargraph/wiki/Building-a-Polargraph-from-a-vitamin-kit#software
With the Arduino UNO and the Motorshield v1, with 200 step motors, settings are normally:

stepsPerRev=400
stepMultiplier=1

Maybe you have good reasons for this because you are using microstepping maybe?

sn
imagecar
Newbie
Posts: 2
Permalink
imagecar
Post Re: line is not on the page?
on: March 9, 2016, 18:03
Quote

thanks for the advice, I resolved,
It was an upload problem!!!!

With the Arduino UNO and the Motorshield v1, with 200 step motors, settings are normally:

then Arduino one and motorshield v1 is better set 400 steps 🙂

thanks Sandy
Metroid
Newbie
Posts: 14
Permalink
Post Re: line is not on the page?
on: April 20, 2016, 22:42
Quote

Hi! i'm italian too ahah 😉

i'm having the same problem with my machine, which was your solution eventually?

thank you

Matteo

ps: solved!

Pages: [1]
Mingle Forum by cartpauj
Version: 1.0.34 ; Page loaded in: 0.018 seconds.