Forum

Welcome Guest 

Show/Hide Header

Welcome Guest, posting in this forum requires registration.
Pages: [1]
Author Topic: Rhino and Grasshoppper
Visualbyte
Beginner
Posts: 33
Permalink
Post Rhino and Grasshoppper
on: March 18, 2015, 09:11
Quote

Rhino 3d has pretty good 2d tools

DenisM
Newbie
Posts: 18
Permalink
DenisM
Post Re: Rhino and Grasshoppper
on: March 19, 2015, 07:03
Quote

Many thanks for sharing this, this is really interesting and amazing tools.
DaniK
Beginner
Posts: 34
Permalink
DaniK
Post Re: Rhino and Grasshoppper
on: November 23, 2015, 21:43
Quote

fyi! just posted this:
http://www.polargraph.co.uk/forum/polargraphs-group2/building-hardware-forum3/sweet-spot-calculations-thread474.0/#postid-2761

i have some experience with Rhino and Grasshopper...just got a polargraph....and I am currently setting up a GH-Definition to generate CMYK halftone patterns...almost there...already have that part from RGB (what the Image sampler spits out) to CMYK and dot area and diameter scaling of small circles according to the (LPI)resolution....unfortunately calculation times are not so short anymore...takes a couple of seconds when parameters change...or the amount of sample points gets very high.....

so far it generates coloured circles (and/or trimmed planar surfaces)....the preview doesn't do the screen blending ...therefore it looks a bit odd on the RGB computer screen...

Image
Image
Image
DaniK
Beginner
Posts: 34
Permalink
DaniK
Post Re: Rhino and Grasshoppper
on: January 11, 2016, 13:32
Quote

Hi everyone,

just wanted to share a small definition I set up on the weekend and some of the first results....(sorry for the bad pictures...only have my mobile-phone camera...)
The baked curves can easily be exported to illustrator or inkscape and then saved as an svg to print with the polargraphcontroller. (For 1:1 size scale the vectors saved in illustrator in polargraphcontroller to 36.9% or (37 😉 ) (as it converts 1mm to 1px)

Also you find some additional (technical) information here:
http://www.polargraph.co.uk/forum/polargraphs-group2/troubleshooting-forum5/saw-tooth-circle-and-dubious-text-thread395.0/#postid-2841/

hope anyone can make use of it!
Daniela

Image
Image
Image
DaniK
Beginner
Posts: 34
Permalink
DaniK
Post Re: Rhino and Grasshoppper
on: March 23, 2016, 14:31
Quote

first CMYK "Circle"-Pattern test!

Image
sandy
Administrator
Posts: 1317
Permalink
sandy
Post Re: Rhino and Grasshoppper
on: March 25, 2016, 21:49
Quote

It's a beauty Daniela.
EATYone
Advanced
Posts: 67
Permalink
Post Re: Rhino and Grasshoppper
on: May 11, 2016, 14:53
Quote

Will try to directly send gcode via serial directly inside GrassHopper... Hope it will work soon 🙂
EATYone
Advanced
Posts: 67
Permalink
Post Re: Rhino and Grasshoppper
on: May 11, 2016, 21:20
Quote

.
DaniK
Beginner
Posts: 34
Permalink
DaniK
Post Re: Rhino and Grasshoppper
on: May 14, 2016, 19:32
Quote

Nice! Keep us updated please!
I initially planned to do the same, but got a bit distracted by trying out all the different ways of drawing with it in general 😎
But I guess I will soon have the direct gcode export, that shouldn't be so difficult.
For now the SVG import function works so nicely in Sandy's polargraphcontroller that I didn't feel the need for a direct connection anymore, and I am not so good in programming...but it might safe a lot of time converting data indeed...

Are you doing that with "Firefly"?

Best
D
EATYone
Advanced
Posts: 67
Permalink
Post Re: Rhino and Grasshoppper
on: June 28, 2016, 15:51
Quote

Quote from DaniK on May 14, 2016, 19:32

I initially planned to do the same, but got a bit distracted by trying out all the different ways of drawing with it in general 😎

same pb here....

Working on another "problem", want to use 433Mhz to drive the servo, to delet those 3 wire 😛

ianmcmill
Newbie
Posts: 8
Permalink
Post Re: Rhino and Grasshoppper
on: September 9, 2016, 13:41
Quote

I just installed Rhino for the first time. But I was able to copy the node network with the moon image. I only wonder what that surface node does in the top left corner? Do I need to create a plane in Rhino???

EDIT
Okay I screamed for help too early. Again.

Create rectangle (2poins) -> RMB on srf node -> set one surface -> LMB created rectangle.
Pages: [1]
Mingle Forum by cartpauj
Version: 1.0.34 ; Page loaded in: 0.027 seconds.