Forum

Welcome Guest 

Show/Hide Header

Welcome Guest, posting in this forum requires registration.
Pages: [1]
Author Topic: Drawing cropped on the sides and bottom
Gregol
Newbie
Posts: 3
Permalink
Post Drawing cropped on the sides and bottom
on: February 28, 2016, 13:26
Quote

I don't know what I am doing wrong. My drawing is always cropped vertically on both sides and circularly on the bottom.
He will draw the edge of the crop, so I get nice vertical lines on the sides and an arc on the bottom.

Image
sandy
Administrator
Posts: 1317
Permalink
sandy
Post Re: Drawing cropped on the sides and bottom
on: February 29, 2016, 15:39
Quote

A triangular shaped drawing, but only the blue area contains detail?

Vector drawing (SVG)?

You may have cropped the drawing using the "frame" ("set area to frame").

Do you get any messages in the error log (column right of the command queue) in the controller?

Feedback in the controller

The curved bottom indicates there's a bit of a problem with calibration.
https://github.com/euphy/polargraph/wiki/Distorted-drawings#narrow-bottom

The parallel sides PLUS the concave bottom is a bit unusual. Let us know how you get on.

When you "select area" and then do "draw outline" to trace the outline, do you get a rectilinear shape drawn, or is it distorted somehow?

sn
Pages: [1]
Mingle Forum by cartpauj
Version: 1.0.34 ; Page loaded in: 0.021 seconds.