Forum

Welcome Guest 

Show/Hide Header

Welcome Guest, posting in this forum requires registration.
Pages: [1]
Author Topic: Drbo not working
patlink72
Newbie
Posts: 4
Permalink
Post Drbo not working
on: December 25, 2012, 19:32
Quote

Hi
I have got the Stuart Childs DRBO nice kit easy to assemble.
but the stepper motor colours do not match the instructions 🙁 so I researched the motor and found some colour combinations which I tried to match to the arduino but with no joy
attached is a picture of the set up so far

can anyone help please

want to play with my xmas toy

thanks
pat

Image
kongorilla
Pro
Posts: 362
Permalink
kongorilla
Post Re: Drbo not working
on: December 26, 2012, 01:21
Quote

Hi Pat, welcome to the party!

Are the motors reacting at all? Jittering when you give a move command? Or nothing?

Do you have a multimeter? You can tell if you've gotten the pairs right if there's continuity in each pair. If you don't have a multimeter, you can try running a circuit through, say, red and blue, and if the circuit works the pair is correct.

(I'm assuming all else is going well? You've set the serial port in the properties.txt, the controller software says 'Polargraph READY' and you've unpaused the 'CommandQueue" before you give commands that should make the motors move?)
patlink72
Newbie
Posts: 4
Permalink
Post Re: Drbo not working
on: December 28, 2012, 12:39
Quote

spoke with stuart this morning got the Arduino uploaded and had to make a JAVA update now the 32 version won't work on my 64-bit version laptop. will boot up PC that is running Linux

Pages: [1]
Mingle Forum by cartpauj
Version: 1.0.34 ; Page loaded in: 0.016 seconds.