Forum

Welcome Guest 

Show/Hide Header

Welcome Guest, posting in this forum requires registration.
Pages: [1]
Author Topic: Pen lift/drop fails when command is sent without a value
billc
Newbie
Posts: 1
Permalink
Post Pen lift/drop fails when command is sent without a value
on: September 18, 2014, 15:29
Quote

In the latest code (9-18-2014) pen lift/drop fails to work when sent without a value. The pen lift test fails as does pen lift/drop when drawing. Pen lift/drop does work when the pen lift or drop button is clicked since in this case the controller sends the command with a explicit value. I am using a Adafruit motor shield V1.
sandy
Administrator
Posts: 1317
Permalink
sandy
Post Re: Pen lift/drop fails when command is sent without a value
on: September 18, 2014, 21:00
Quote

Ok thanks! Let's have a look!
sandy
Administrator
Posts: 1317
Permalink
sandy
Post Re: Pen lift/drop fails when command is sent without a value
on: September 19, 2014, 00:30
Quote

Ok, just had a look at that, found the problem and hopefully fixed it. Re-bundled, code committed into the project repository.

https://github.com/euphy/polargraphcontroller/releases/tag/1.10.2
http://www.polargraph.co.uk/2014/09/significant-changes-to-uno-firmware/

Thanks!
sn
rincey12
Newbie
Posts: 8
Permalink
Post Re: Pen lift/drop fails when command is sent without a value
on: September 19, 2014, 20:12
Quote

The new server version does not work for me. The Arduino doesn't react at all (or strange) to command sent. E.g. Set Home does not work at all now.
Switched back to yesterdays version which works fine.
sandy
Administrator
Posts: 1317
Permalink
sandy
Post Re: Pen lift/drop fails when command is sent without a value
on: September 19, 2014, 21:37
Quote

Aha, did you use the updated controller too?

sn
rincey12
Newbie
Posts: 8
Permalink
Post Re: Pen lift/drop fails when command is sent without a value
on: September 19, 2014, 21:49
Quote

I am quite sure that I updated controller and server - but will check in an hour or so - plotting right now 🙂
sandy
Administrator
Posts: 1317
Permalink
sandy
Post Re: Pen lift/drop fails when command is sent without a value
on: September 19, 2014, 21:50
Quote

Oh.. nuts, that was my best guess.
rincey12
Newbie
Posts: 8
Permalink
Post Re: Pen lift/drop fails when command is sent without a value
on: September 19, 2014, 22:07
Quote

Are you sure that the controller was updated at all? The files in the last ZIP show
/controller/application.macosx/polargraphcontroller.app - 17.09.2014, 23:44
/arduino-source/polargraph_server_a1/polargraph_server_a1.ino, 19.09.2014, 00:13
so the controller binary seems to be 2 days older than the server?
sandy
Administrator
Posts: 1317
Permalink
sandy
Post Re: Pen lift/drop fails when command is sent without a value
on: September 19, 2014, 22:11
Quote

Right, the binary wasn't updated in the recent fixes, only in the first one. If you'd already updated it, then that's not the problem I guess.
Pages: [1]
Mingle Forum by cartpauj
Version: 1.0.34 ; Page loaded in: 0.025 seconds.