Forum

Welcome Guest 

Show/Hide Header

Welcome Guest, posting in this forum requires registration.
Pages: [1]
Author Topic: polargraph not connected?
RoboIVA
Newbie
Posts: 1
Permalink
Post polargraph not connected?
on: May 30, 2013, 22:01
Quote

So my robotics class and I are working on building our own polargraph as a project. We are close to the end of it all, but we have run into a problem with the polargraphcontroller, we finely got the program to read the the usb, because before it told us serial connection. We got past this problem by updating the FTDI drivers, but now it tells us that the polargraph not connected. We have tried a mac and pc. What can we do to fix this problem? Any help would be appreciated, thank you.
sandy
Administrator
Posts: 1317
Permalink
sandy
Post Re: polargraph not connected?
on: May 30, 2013, 22:32
Quote

Cool project 🙂 and welcome to the forum.

First off, is connect to the arduino using the regular arduino environment. So, serial monitor in the Arduino IDE. I am assuming that you have managed that if you've got the firmware uploaded.

The serial port to use is selected by clicking on "serial port" button on the "setup" tab of the controller app, and selecting the port to use. There isn't anything more to it. Googling "polargraph serial port" reveals two links in the top two results that say exactly this.

Good luck!
sn
Pages: [1]
Mingle Forum by cartpauj
Version: 1.0.34 ; Page loaded in: 0.031 seconds.