Forum

Welcome Guest 

Show/Hide Header

Welcome Guest, posting in this forum requires registration.
Pages: [1]
Author Topic: Strange glitch using spirals?
AndyB
Beginner
Posts: 28
Permalink
AndyB
Post Strange glitch using spirals?
on: April 28, 2013, 10:59
Quote

So I've been playing around with the new and improved spirals drawing technique. I really love the look and accuracy of them, and wanted to see how they would look as big as possible. So I set the grid value to a high number, 300 something, and started up. An odd thing happened as it was drawing: It would start off fine, but suddenly drop out of the spiral like it couldn't hold the turn or something, before returning to drawing again. This happened at the same point in each round of the spiral. See pic below.

Did I do something weird here, or is this some bug??

Image
sandy
Administrator
Posts: 1317
Permalink
sandy
Post Re: Strange glitch using spirals?
on: April 28, 2013, 11:07
Quote

Oh, ha! That's peculiar! I hadn't tried them that size, it's definitely a bug... I wonder what the trigger is. So it gets a certain number of turns out and ten decides to have an excursion. I will have a closer look, thanks for the pic and the note!

sn
sandy
Administrator
Posts: 1317
Permalink
sandy
Post Re: Strange glitch using spirals?
on: April 28, 2013, 21:42
Quote

Indeed, I have it too, glitches at 0.8mm pen, but not 0.4 or 1.6mm (for the same sized pixel). I will try changing the number of segments per circle and see if that makes any difference.

sn
Pages: [1]
Mingle Forum by cartpauj
Version: 1.0.34 ; Page loaded in: 0.022 seconds.