OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!

This will be an Aluminum OX build. Plates and all design credit goes to Mark from open builds. I may add my own touches but mainly this is to see how Aluminum plates perform

This build is intended as a light alternative to the Dremel rotary tool.

While building my OX AI I found myself with left over v slot and thought to myself, what do I need that I can build using them? Well since I make a lot of my own PCB boards for projects I figured a micro PCB mill would fit the bill ;) With inspiration from the OX and OX AI I give you the Stinger V :)

With such great success/attention my laser got, I ended up with a good friend that would like to dabble in stencil art and so I have decided to share my build with him and you here :) I will be using all the same electronics as in my previous build except the driver boards I will be using are the famous reprap 4988's they are more easy to come by and cost less. I will also be using open builds mini v wheels/v groove extrusion just so I can get a feel for their versatile products

A cool little CNC router build that uses the V-Slot belt & pinion drive and stock parts.

Phlatprinter foam cutting CNC machines are awesome space saving mills that use a rotary axis as a sheet feed.

It took me 18 long nights to build it

Super rigid Delta printer, using 20X40 V-Slot

Although this build is typically Mach3 related there is no reason it cannot be adapted for use with any machine control software which provides a PWM spindle control output. As an addition, an option has now been added which will enable the interface to manually control outrunner speed without the need for a PWM signal.

Dual extruder 3D printer and laser cutter.

Here it is my intention to show what was involved in adding a CO2 laser to my existing CNC machine.

The method used for tool position setting is a matter of personal choice but this is what I do.

The method used for tool position setting is a matter of personal choice but this is what I do.

Drag knife and pen holder which mounts in spindle collet.

Yet Another Openbuilds Router, my version :-)