Forum

Welcome Guest 

Show/Hide Header

Welcome Guest, posting in this forum requires registration.
Pages: [1]
Author Topic: Help with Norwegian drawing...
parker_t
Newbie
Posts: 20
Permalink
parker_t
Post Help with Norwegian drawing...
on: January 11, 2018, 21:45
Quote

Hi Sandy, et al...
So, I've got my Polargraph SD upgraded an working with vector drawings and other images... now, I'm ready to venture into exploring the Norwegian option. I found some old instructions, dated August 4, 2012, but, they don't seem to work with the newest controller program... roving tab is quit different.
So, can you give me a step by step guide for using the Norwegian option...

Thanks in advance... this device is great!

Tom
sandy
Administrator
Posts: 1317
Permalink
sandy
Post Re: Help with Norwegian drawing...
on: January 12, 2018, 09:19
Quote

Hi Tom, great to see you wrangling Norwegian Pixel!

Roving tab hasn't really changed since then, still do the same thing as in that guide from way back (http://www.polargraph.co.uk/2012/08/norwegian-pixel/):

On the roving tab:
1) "select area" that you want the drawing to go into
2) "send roving area" to the machine - this tells it what space it should be confined to
3) "draw norwegian" which pops up the dialog box where you enter the filename, the wave amplitude and wave length, and can do a trial "trace outline"

You say it doesn't work ... can you say what you've tried and what happens instead?

sn
parker_t
Newbie
Posts: 20
Permalink
parker_t
Post Re: Help with Norwegian drawing...
on: January 12, 2018, 20:49
Quote

Hi... step (2) was the problem... I did't do it! Simple solution.
It's running now and appears to be doing what it's designed to do.

Thanks Sandy.
Pages: [1]
Mingle Forum by cartpauj
Version: 1.0.34 ; Page loaded in: 0.019 seconds.