Description

Set various motion settings. See parameters for details.

Notes

• View the current setting with M503.

• If EEPROM_SETTINGS is enabled, these are saved with M500, loaded with M501, and reset with M502.

Usage

M205 [B<µs>] [E<jerk>] [J<deviation>] [S<units/s>] [T<units/s>] [X<jerk>] [Y<jerk>] [Z<jerk>]

Parameters

• [B<µs>] Minimum segment time (µs)

• [E<jerk>] E max jerk (units/s)

• [J<deviation>] Junction deviation (requires JUNCTION_DEVIATION)

• [S<units/s>] Minimum feedrate for print moves (units/s)

• [T<units/s>] Minimum feedrate for travel moves (units/s)

• [X<jerk>] X max jerk (units/s)

• [Y<jerk>] Y max jerk (units/s)

• [Z<jerk>] Z max jerk (units/s)

Examples

Set some advanced settings.

M205 T40 ; Travel feedrate = 40mm/s