Printer technology: Fused filament fabrication
Build area: 300 x 300 x 225 mm (12 x 12 x 9 in) 
Build volume: 20,250 cm³
Infill / inner perimeter print speed: 150 mm/s with 350 μm nozzle
Outer perimeter print speed: ~40 mm/s
Acceleration: 1000 mm/s²
Filament: 1.75 mm PLA (supported), PVA, HIPS, ABS, PC, Nylon, Laywoo-D3, T-glase
Build platform: Heated borosilicate glass, 120ºC max temperature.
X/Y resolution 20 μm
Layer thickness: 300 - 50 μm with 350 μm nozzle
Minimum feature size: 500 μm
Standard nozzle diameter: 350 μm

Electronics: RAMBo
Power requirement: 100-240 VAC (power cord included)
Printer dimensions (frame): 406 x 560 x 510 mm (16 x 22 x 20 in)
Add 230 mm (9") for spool holders - X axis; add 76 mm (3") for LCD console - Y axis.
Power supply unit: 24 V, 15 A

Connectivity: 4 GB SD card (included), USB (cord provided, optional alternative)
Firmware: Marlin (preloaded and calibrated)
Slicing software: KISSlicer PRO (included); supports Mac, Windows, and Linux. Also compatible with Slic3r.

The Isis One ships fully assembled, calibrated, tested, and ready to print right out of the box! No assembly at all is necessary. No settings have to be adjusted to optimize print quality. GCode for all of the prints featured on our website is included on the SD card.